3Com 8807 - Debugging Igmp; Display Igmp Group

35
IGMP CONFIGURATION COMMANDS
IGMP Configuration
Commands
debugging igmp Syntax
debugging igmp { all | event | host | packet | timer }
undo debugging igmp { all | event | host | packet | timer }
View
User view
Parameter
all: All the debugging information of IGMP.
event: Debugging information of IGMP event.
host: Debugging information of IGMP host.
packet: Debugging information of IGMP packets.
timer: Debugging information of IGMP timers.
Description
Use the debugging igmp command to enable IGMP debugging functions.
Use the undo debugging igmp command to disable the debugging functions.
By default, IGMP debugging functions are disabled.
Example
# Enable all IGMP debugging functions
<SW8800> debugging igmp all
display igmp group Syntax
display igmp group [ group-address | interface vlan-interface
interface-number ]
View
Any view