3Com 8807 - Display Snmp-Agent Group

900 CHAPTER 53: SNMP CONFIGURATION COMMANDS
Description
Use the display snmp-agent community command to view the currently
configured community names.
Example
# Display the currently configured community names.
<SW8800> display snmp-agent community
Community name:public
Group name:public
Storage-type: nonVolatile
Community name:private
Group name:private
Storage-type: nonVolatile
display snmp-agent
group
Syntax
display snmp-agent group [ group-name ]
View
Any view
Parameter
groupname: Group name.
Description
Use the display snmp-agent group command to view group name, security
mode, state of various views and storage modes.
Example
# Display SNMP group name and safe mode.
<SW8800> display snmp-agent group
Group name: 3com
Security model: v2c noAuthnoPriv
Readview: ViewDefault
Writeview: <no specified>
Notifyview :<no specified>
Storage-type: nonVolatile
The following table describes the output fields.
Tabl e 124 Description on the fields of the display snmp-agent community command
Field Description
community
name
Community name
Group name Group name
storage-type Storage mode
Tabl e 125 Description on the fields of the display snmp-agent group command
Field Description
groupname SNMP Group name