3Com 8807 - Debugging Isis

Integrated IS-IS Configuration Commands 463
Description
Use the cost-style command to set the cost type of an IS-IS packet received/sent
by the router.
Use the undo cost-style command to restore the default settings.
By default, IS-IS only receives/sends packets whose cost type is narrow.
Related command: isis cost.
Example
# Set IS-IS to receive packets whose cost type is narrow or wide, but only send
packets whose cost type is narrow.
[SW8800] isis
[3Com-isis] cost-style narrow-compatible
debugging isis Syntax
debugging isis { adjacency | all | authentication-error | checksum-error |
circuit-information | configuration-error | datalink-receiving-packet |
datalink-sending-packet | general-error | interface-information |
memory-allocating | receiving-packet-content | restart-events |
self-originate-update | sending-packet-content | snp-packet | spf-event |
spf-summary | spf-timer | task-error | timer | update-packet }
undo debugging isis { adjacency | all | authentication-error | checksum-error
| circuit-information | configuration-error | datalink-receiving-packet |
datalink-sending-packet | general-error | interface-information |
memory-allocating | receiving-packet-content | restart-events |
self-originate-update | sending-packet-content | snp-packet | spf-event |
spf-summary | spf-timer | task-error | timer | update-packet }
View
User view
Parameter
adjacency: IS-IS adjacency related packets.
all: All IS-IS related debugging information.
authentication-error: IS-IS authentication errors.
checksum-error: IS-IS checksum errors.
circuit-information: Information about IS-IS enabled interface.
configuration-error: IS-IS configuration errors.
datalink-receiving-packet: Data link layer’s packets-receiving status.
datalink-sending-packet: Data link layer’s packets-sending status.
general-error: IS-IS error information.