714 CHAPTER 40: BGP/MPLS VPN CONFIGURATION COMMANDS
Description
Use the display ip vpn-instance command to view the information related to
VPN-instance, such as RD, description, and interfaces of the VPN instance.
Example
# Display the information about VPN-instance VPN 1.
<SW8800> display ip vpn-instance vpn1
VPN-Instance : vpn1
No description
Route-Distinguisher : 100:6
Interfaces :
Vlan-interface1100
display mpls l3vpn-lsp Syntax
display mpls l3vpn-lsp [ vpn-instance vpn-instance-name ] [ transit | egress |
ingress ] [ include text | verbose ]
View
Any view
Parameter
transit: LSP for the ASBR (Autonomous System Boundary Router).
egress: LSP of egress VPN.
ingress: LSP of ingress VPN.
vpn-instance: Specifies the name of VPN routing/forwarding VPN-instance
include text: Only matches the string including the specified information.
verbose: Displays detailed information.
Description
Use the display mpls l3vpn-lsp command to view the information of MPLS
L3VPN LSPs of the specified VPN-instance.
Example
# Display MPLS L3VPN transit lsp information on the ASBR.
<SW8800> display mpls l3vpn-lsp transit
-------------------------------------------------------------------
LSP Information: Ebgp Transit Lsp
-------------------------------------------------------------------
NO I/O-LABEL NEXTHOP IN-INTERFACE OUT-INTERFACE
1 1025/3 30.30.1.2 ------- Vlan20
2 1024/3 10.10.1.2 ------- Vlan10
3 1026/1024 30.30.1.2 ------- Vlan20
TOTAL: 3 Record(s) Found.
Tabl e 94 Description on the fields of the command
Field Description
NO Number
To Next Page
Loading...
