3Com 8807 - Display Bgp Multicast Routing-Table As-Path-Acl; Display Bgp Multicast Routing-Table Cidr

660 CHAPTER 38: MBGP MULTICAST EXTENSION CONFIGURATION COMMANDS
Parameter
ip-address: IP address of the network segment whose MBGP routing information
with specified IP address.
Description
Use the display bgp multicast routing-table command to view MBGP routing
information.
Example
# Display MBGP routing information of network segment 14.1.0.0.
<SW8800> display bgp multicast routing-table 14.1.0.0
display bgp multicast
routing-table as-path-acl
Syntax
display bgp multicast routing-table as-path-acl acl-number
View
Any view
Parameter
acl-number: Matched AS path list number, ranging from 1 to 199.
Description
Use the display bgp multicast routing-table as-path-acl command to view
routes that match an as-path acl.
Example
# Display routes that match the as-path-acl 2.
<SW8800> display bgp multicast routing-table as-path-acl 2
display bgp multicast
routing-table cidr
Syntax
display bgp multicast routing-table cidr
View
Any view
Parameter
None
Description
Use the display bgp multicast routing-table cidr command to view the
non-natural network mask, namely the classless inter-domain routing (CIDR)
information.
Example
# View CIDR routing information.
<SW8800> display bgp multicast routing-table cidr