3Com 8807 - User-Name-Format; Timer Response-Timeout

366 CHAPTER 21: AAA AND RADIUS/HWTACACS PROTOCOL CONFIGURATION COMMANDS
Example
# Set the real-time accounting interval of the HWTACACS scheme 3com to 51
minutes.
[3Com-hwtacacs-3com] timer realtime-accounting 51
timer response-timeout Syntax
timer response-timeout seconds
undo timer response-timeout
View
HWTACACS view
Parameter
seconds: TACACS server response timeout time, which is in the range of 1 to 300
seconds and defaults to 5 seconds.
Description
Use the timer response-timeout command to set the TACACS server response
timeout time.
Use the undo timer response-timeout command to restore the default setting.
n
Since HWTACACS is implemented based on TCP, so server response timeout or
TCP timeout may terminate the connection to the TACACS server.
Related command: display hwtacacs.
Example
# Set the TACACS server response timeout time to 30 seconds.
[SW8800] hwtacacs scheme test1
[3Com-hwtacacs-test1] timer response-timeout 30
user-name-format Syntax
user-name-format { with-domain | without-domain }
View
HWTACACS view
Tabl e 45 Number of users and recommended interval
Number of users Real-time accounting interval ( in minutes)
1 - 99 3
100 - 499 6
500 - 999 12
≥1000 ≥15