3Com 8807 - Delete

994 CHAPTER 59: FTP&TFTP CONFIGURATION COMMANDS
Use the undo debugging command to disable the debugging for FTP Client
commands.
By default, the debugging for FTP Client commands is disabled.
Example
# Enable the debugging for FTP Client commands.
<SW8800> ftp
[ftp] debugging
delete Syntax
delete remotefile
View
FTP Client view
Parameter
remotefile: File name.
Description
Use the delete command to cancel the specified file.
Example
# Delete the file temp.c
<SW8800>ftp
[ftp] delete temp.c
dir Syntax
dir [ filename ] [ localfile ]
View
FTP Client view
Parameter
filename: File name to be queried.
localfile: Saves local file name of the query result.
Description
Use the dir command to query a specified file.
If no parameter of this command is specified, then all the files in the directory will
be displayed.
Example
# Query the file temp.c and saves the results in the file temp1.
<SW8800> ftp
[ftp] dir temp.c temp1