3Com 8807 - If-Match Mpls-Label; If-Match Vpn-Target

LDP Configuration Commands 719
Parameter
group-name: Name of a neighbor peer group. It can be expressed in string of
letters and numbers from 1 to 47 in length.
internal: Creates an internal peer group.
external: Creates an external peer group including other sub-AS groups in
federation.
Description
Use the group command to create a BGP peer group in VPN-instance.
Use the undo group command to delete a specified BGP peer group.
By default, the MP-IBGP peer is created.
Members in one peer group must have the same routing export policy as the
group does, but can have different ingress policies.
Example
# Create an MP-EBGP peer group named test.
[3Com-bgp-af-vpn-instance] group test external
if-match mpls-label Syntax
if-match mpls-label
undo if-match mpls-label
View
Route-policy view
Parameter
None
Description
Use the if-match mpls-label command to configure the system to match only the
public network routes that carries an MPLS label.
Use the undo if-match mpls-label command to cancel this configuration.
Related command: apply mpls-label.
Example
# Define an if-match clause to allow label-carrying routes to pass the filtering of
this clause.
[3Com-route-policy] if-match mpls-label
if-match vpn-target Syntax
if-match vpn-target { vpn-target | begin vpn-target count }