3Com 8807 - Mpls L2 Vpn; Mpls L2 Vpn Encapsulation

770 CHAPTER 41: MPLS VLL CONFIGURATION COMMANDS
View
BGP view
Parameter
None
Description
Use the l2vpn-family command to create L2VPN address family view.
Use the undo l2vpn-family command to remove L2VPN address family view.
Example
# Create L2VPN address family view.
[SW8800] bgp 100
[3Com-bgp] l2vpn-family
[3Com-bgp-af-l2vpn]
mpls l2vpn Syntax
mpls l2vpn
undo mpls l2vpn
View
System view
Parameter
None
Description
Use the mpls l2vpn command to enable L2VPN.
Use the undo mpls l2vpn command to disable L2VPN.
To execute the command, you need to enable MPLS first.
Related command: mpls, mpls lsr-id.
Example
# Configure LSR ID and enable MPLS.
[SW8800] mpls lsr-id 10.0.0.1
[SW8800] mpls
# Enable L2VPN.
[SW8800] mpls l2vpn
mpls l2vpn
encapsulation
Syntax
mpls l2vpn vpn-name [ encapsulation { ethernet | vlan } ]
undo mpls l2vpn vpn-name