System Debug Commands 1033
Parameter
None
Description
Use the display version command to view such information as software version,
issue date and the basic hardware configurations.
Example
# Display the information about the system version.
<SW8800> display version
Copyright Notice:
All rights reserved (Sep 15 2005).
Without the owner’s prior written consent, no decompiling
nor reverse-engineering shall be allowed.
3Com-3Com Versatile Routing Platform Software
Copyright (c) 2004-2005 Hangzhou 3Com-3Com Technology Co.,Ltd. and
its licensors All rights reserved.
Copyright (c) 1998-2003 3Com Corporation Co.,Ltd. All rights reserved.
3Com Switch 8800 Family uptime is 0 week, 2 days, 1 hours, 17 minutes
SRPA 0: uptime is 0 weeks,2 days,1 hour,17 minutes
3ComSwitch 8800 Family with 1 MPC755 Processor
512M bytes SDRAM
16384K bytes Flash Memory
512K bytes NVRAM Memory
PCB Version : Ver.F
BootROM Version : 111
CPLD Version : 001
Software Version : Switch 8800 Family-Comware 310-r1265
3CV17538: uptime is 0 weeks,2 days,1 hour,15 minutes
3ComSwitch 8800 Family LPU with 1 MPC8245 Processor
128M bytes SDRAM
0K bytes NVRAM Memory
PCB Version : REV.0
BootROM Version : 103
CPLD Version : 002
Software Version : Switch 8800 Family-Comware 310-r1265
CPUCard 1
PCB Ver : .4
CPLD Ver : 001
SubCard 1
PCB Ver : Ver.B
CPLD Ver : NONE
SubCard 2
PCB Ver : REV.0
CPLD Ver : NONE
System Debug
Commands
debugging Syntax
debugging { all | timeout interval | module-name [ debugging-option ] }
undo debugging { all | module-name [ debugging-option ] }
To Next Page
Loading...
