3Com 8807 - Display Ip Host; Display Ip Interface

7
IP ADDRESS CONFIGURATION
COMMANDS
IP Address
Configuration
Commands
display ip host Syntax
display ip host
View
Any view
Parameter
None
Description
Use the display ip host command to display all the host names and the
corresponding IP addresses.
Example
# Display all host names and the corresponding IP addresses of the hosts.
<SW8800> display ip host
Host Age Flags Address
My 0 static 1.1.1.1
Aa 0 static 2.2.2.4
display ip interface Syntax
display ip interface interface-type interface-number
View
Any view
Tab le 10 Description on the fields of the display ip host command
Field Description
Host Host name
Age Valid period
Flags Indicates the relationship between the host name and the IP address. If you
configure the host name by using the ip host command, the relationship between
the host name and the IP address is static. If you resolve the host name through DNS,
the relationship between the host name and the IP address is dynamic.
Address Host IP address