3Com 8807 - Traffic-Redirect; Display Port Vlan-Vpn

65
QINQ CONFIGURATION COMMANDS
QinQ Configuration
Commands
display port vlan-vpn Syntax
display port vlan-vpn
View
Any view
Parameter
None
Description
Use the display port vlan-vpn command to display VLAN VPN-related
information of the current system by port number, including current TPID, the
information about VLAN-VPN ports, and the information about VLAN-VPN uplink
ports.
Example
# Display the VLAN VPN-related configuration of the current system.
[SW8800] display port vlan-vpn
VLAN-VPN TPID: 0x9100
GigabitEthernet1/1/1
VLAN-VPN status: enabled
VLAN-VPN VLAN: 1
GigabitEthernet1/1/2
VLAN-VPN uplink status: enabled
traffic-redirect Syntax
Use the following command to deliver Layer 3 traffic classification rules.
traffic-redirect inbound ip-group { acl-number | acl-name } [ rule rule [
system-index index ] ] { nested-vlan nested-vlanid | modified-vlan
modified-vlanid }
undo traffic-redirect inbound ip-group { acl-number | acl-name } [ rule rule ]