3Com 8807 - Display Isolate-User-Vlan

6
ISOLATE-USER-VLAN CONFIGURATION
COMMANDS
Isolate-user-vlan
Configuration
Commands
display isolate-user-vlan Syntax
display isolate-user-vlan [ isolate-user-vlan-num ]
View
Any view
Parameter
isolate-user-vlan-num: VLAN ID of an isolate-user-VLAN.
Description
Use the display isolate-user-vlan command to view the mapping relationships
between isolate-user-VLANs and Secondary VLANs and the ports identifying the
mapping relationships between isolate-user-vlan and Secondary VLAN.
Related command: isolate-user-vlan enable, isolate-user-vlan.
Example
# Display the mapping relationships between isolate-user-VLANs and Secondary
VLANs.
[SW8800] display isolate-user-vlan
Isolate-user-VLAN VLAN ID : 5
Secondary VLAN ID : 3-4
VLAN ID: 5
VLAN Type: static
Isolate-user-VLAN type : isolate-user-VLAN
ARP proxy disabled.
Route Interface: not configured
Description: VLAN 0005
Name: VLAN 0005
Tagged Ports: none
Untagged Ports:
Ethernet2/1/3 Ethernet2/1/4
VLAN ID: 3
VLAN Type: static
Isolate-user-VLAN type : secondary
ARP proxy disabled.
Route Interface: not configured