3Com 8807 - Subvlan

92 CHAPTER 5: SUPER VLAN CONFIGURATION COMMANDS
VLAN Type: static
It is a Sub VLAN. And the Super VLAN is VLAN 2
ARP proxy enabled.
Route Interface: not configured
Description: VLAN 0003
Tagged Ports: none
Untagged Ports:
Ethernet5/1/1
[SW8800]display vlan 4
VLAN ID: 4
VLAN Type: static
It is a Sub VLAN. And the Super VLAN is VLAN 2
ARP proxy enabled.
Route Interface: not configured
Description: VLAN 0004
Tagged Ports: none
Untagged Ports:
Ethernet5/1/2
[SW8800]display vlan 5
VLAN ID: 5
VLAN Type: static
It is a Sub VLAN. And the Super VLAN is VLAN 2
ARP proxy enabled.
Route Interface: not configured
Description: VLAN 0005
Tagged Ports: none
Untagged Ports:
Ethernet5/1/3
subvlan Syntax
subvlan sub-vlan-list
undo subvlan [sub-vlan-list ]
View
VLAN view of super VLAN
Parameter
sub-vlan-list: List of sub VLANs. It is expressed in the form of sub-vlan-list = {
vlan-id [ to vlan-id }&<1-10>. The vlan-id after the keyword to must be larger than
or equal to that before to. &<1-10> means that the preceding parameter can be
repeated up to 10 times.
Description
Use the subvlan command to associate a specified super VLAN to sub VLANs.
Use the undo subvlan command to cancel the mapping relationship between the
super VLAN and sub VLANs.
Note that:
■ The VLANs configured to be the sub VLANs of a super VLAN must be existing
VLANs.