3Com 8807 - Reset Dns Dynamic-Host; Dns Server

866 CHAPTER 48: DNS CONFIGURATION COMMANDS
Use the undo dns resolve command to disable the dynamic domain name
resolution function.
By default, the dynamic domain name resolution function is disabled.
Example
# Enable dynamic domain name resolution.
<3Com< system-view
System View: return to User View with Ctrl+Z.
[SW8800] dns resolve
dns server Syntax
dns server ip-address
undo dns server [ ip-address ]
View
System view
Parameter
ip-address: IP address of the domain name server.
Description
Use the dns server command to configure the IP address of a domain name
server.
Use the undo dns server command to delete the IP address of a domain name
server.
The system supports up to six domain name server. To delete the domain name
server, input the IP address, and the specific server is deleted. Otherwise, all of the
servers are deleted.
Related command: display dns server.
Example
# Configure a domain name server, with an IP address of 172.16.1.1.
<3Com< system-view
System View: return to User View with Ctrl+Z.
[SW8800] dns server 172.16.1.1
reset dns dynamic-host Syntax
reset dns dynamic-host
View
User view
Parameter
None