3Com 8807 - Dhcp Server Option

832 CHAPTER 47: DHCP CONFIGURATION COMMANDS
undo dhcp server netbios-type { interface vlan-interface vlan-id [ to
vlan-interface vlan-id ] | all }
View
VLAN interface view, system view
Parameter
b-node: Specifies b-node to be the NetBIOS node type. DHCP clients of this node
type establish host name-to-IP address mapping by broadcasting. (b stands for
broadcast.)
p-node: Specifies p-node to be the NetBIOS node type. DHCP clients of this node
type establish host name-to-IP address mapping by communicating with NetBIOS
server. (p stands for peer-to-peer.)
m-node: Specifies m-node to be the NetBIOS node type. DHCP clients of this
node type are p nodes which take some broadcast features. (m stands for mixed.)
h-node: Specifies h-node to be the NetBIOS node type. DHCP clients of this node
type are b nodes which take peer-to-peer mechanism. (h stands for hybrid.)
Description
Use the dhcp server netbios-type command to configure the NetBIOS node type
for DHCP clients of DHCP address pool of current or specified VLAN interface.
Use the undo dhcp server netbios-type command to remove the NetBIOS node
type configured for DHCP clients of DHCP address pool of current or specified
VLAN interface.
The default DHCP client NetBIOS node type is h-node.
Related command: netbios-type, dhcp server nbns-list.
Example
# Configure p-node as the NetBIOS node type for DHCP clients of the DHCP
address pool of VLAN interface 1.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] interface vlan-interface 1
[3Com-Vlan-interface1] dhcp server netbios-type p-node
dhcp server option Syntax
In VLAN interface view:
dhcp server option code { ascii ascii-string | hex hex-string | ip-address
ip-address [ ip-address ] }
undo dhcp server option code
In system view: