AAA Configuration Commands 325
The "Change user password" option is available only when the user passes the
authentication; otherwise, this option is in grey and unavailable.
Example
# Specify the URL of the Web page used to change password on the self-service
server to be http://10.153.89.94/selfservice/modPasswd1x.jsp|userName.
[SW8800] domain system
[3Com-isp-system] self-service-url enable
http://10.153.89.94/selfservice/modP
asswd1x.jsp|userName
service-type Syntax
service-type { ftp [ ftp-directory directory ] | lan-access | ppp [call-number
call-number | callback-nocheck | callback-number callback-number ] | ssh [
level level | telnet | terminal ] | telnet [ level level | ssh | terminal ] | terminal [
level level | ssh | telnet ] }
undo service-type { ftp [ ftp-directory directory ] | lan-access | ppp
[call-number call-number | callback-nocheck | callback-number
callback-number ] | ssh [ level level | telnet | terminal ] | telnet [ level level | ssh
| terminal ] | terminal [ level level | ssh | telnet ] }
View
Local user view
Parameter
ftp: Specifies user types as FTP.
ftp-directory directory: Specifies the directory of FTP users, directory is a character
string of up to 64 characters.
lan-access: Specifies user type to Lan-access, which mainly refers to Ethernet
accessing users, 802.1x supplicants for example.
ppp: Specifies PPP users.
call-number: Sets the phone number of the caller.
callback-nocheck: Specifies nocheck when the Modem calls back.
callback-number: Sets the callback number for callback user.
ssh: Specifies SSH users.
telnet: Specifies user type as Telnet.
level level: Specifies the level of Telnet or SSH users. The argument level is an
integer in the range of 0 to 3 and defaults to 0.
terminal: Specifies user type as Terminal.
Description
Use the service-type command to configure a service type for a particular user.
To Next Page
Loading...
