566 CHAPTER 29: ROUTE CAPACITY CONFIGURATION COMMANDS
View
System view
Parameter
256: Sets the maximum number of VPN routing & forwarding instances (VRFs)
supported by current system to 256.
512: Sets the maximum number of VRFs supported by current system to 512.
1024: Sets the maximum number of VRFs supported by current system to 1024.
Description
Use the router VRF-limit command to set the maximum number of VPN routing
and forwarding instances (VRFs) supported by current system. If the number of
VRFs supported by a card is less than this number, the system will inhibit the card
from working. This number is 256 by default.
Example
# Set the maximum number of VRFs supported by current system to 512.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] router VRF-limit 512
To Next Page
Loading...
