250 CHAPTER 17: QOS COMMANDS
cos-value2: 802.1p priority value corresponding to Local-precedence 2, in the
range of 0 to 7.
cos-value3: 802.1p priority value corresponding to Local-precedence 3, in the
range of 0 to 7.
cos-value4: 802.1p priority value corresponding to Local-precedence 4, in the
range of 0 to 7.
cos-value5: 802.1p priority value corresponding to Local-precedence 5, in the
range of 0 to 7.
cos-value6: 802.1p priority value corresponding to Local-precedence 6, in the
range of 0 to 7.
cos-value7: 802.1p priority value corresponding to Local-precedence 7, in the
range of 0 to 7.
Description
Use the local-precedence command to configure the "Local-precedence +
Conform-level -> 802.1p priority" mapping table of current conform level.
Use the undo local-precedence command to restore default configuration of the
"Local-precedence + Conform-level -> 802.1p priority" mapping table.
After entering conform level view, you can configure the " Local-precedence +
Conform-level -> 802.1p priority " mapping table of the corresponding level. For
example, you can enter conform level 0 view and configure the "
Local-precedence + Conform-level 0 -> 802.1p priority " mapping table.
Example
# Configure the "Local-precedence + Conform-level 0 -> 802.1p priority"
mapping table.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800]qos conform-level 0
[3Com-conform-level-0] local-precedence 0 1 2 3 5 5 6 7
The configured mapping table:
Tabl e 34 Local-precedence + Conform-level - 802.1p priority " mapping table
Local-precedence Conform-level 802.1p
0 0 0
1 0 1
2 0 2
3 0 3
4 0 5
5 0 5
6 0 6
7 0 7
To Next Page
Loading...
