3Com 8807 - Page 237

QoS Commands 235
dscp-policed-service-map [ dscp-list ]: Displays "DSCP + Conform-level ->
Service-parameter" mapping table. dscp-list: DSCP value, which can be a single
value or values, for example, you can type single DSCP value "46", or DSCP values
"0 8 10 16" (a space is required between two values). If you type value(s) for this
parameter, then only the specified DSCP items will be displayed. Otherwise, the
system displays the whole mapping connection. DSCP value is in the range of 0 to
63.
exp-policed-service-map: Displays "EXP + Conform-level -> Service-parameter"
mapping table. EXP is MPLS priority of MPLS packets.
local-precedence-cos-map: Displays "Local-precedence + Conform-level ->
Priority" mapping table
Description
Use the display qos conform-level command to view the "DSCP +
Conform-level -> Service-parameter" mapping table, "EXP + Conform-level ->
Service-parameter" mapping table and "Local-precedence + Conform-level ->
Priority" mapping table.
Example
# Display the "DSCP + Conform-level -> Service-parameter" mapping table.
<SW8800> display qos conform-level 0 dscp-policed-service-map
Conform-level 0 :
Dscp-policed-service Map :
dscp : dscp exp cos local-precedence drop-precedence
--------------------------------------------------------------------
0 : 0 0 0 0 0
8 : 8 1 1 1 0
10 : 10 1 1 1 0
16 : 16 2 2 2 0
18 : 18 2 2 2 0
24 : 24 3 3 3 0
26 : 26 3 3 3 0
32 : 32 4 4 4 0
34 : 34 4 4 4 0
40 : 40 5 5 5 0
46 : 46 5 5 5 0
48 : 48 6 6 6 0
56 : 56 7 7 7 0
# Display the "EXP + Conform-level -> Service-parameter" mapping table.
<SW8800> display qos conform-level 0 exp-policed-service-map
conform-level 0 :
exp : dscp exp cos local-precedence drop-precedence
--------------------------------------------------------------------
0 : 2 0 0 0 0
1 : 10 1 1 1 0
2 : 18 2 2 2 0
3 : 26 3 3 3 0
4 : 34 4 4 4 0
5 : 42 5 5 5 0
6 : 50 6 6 6 0
7 : 58 7 7 7 0