QoS Commands 269
Command Format Which Applies IP Group and Link Group ACL at Same
time
traffic-redirect inbound ip-group { acl-number | acl-name } [ rule rule ]
link-group { acl-number | acl-name } [ rule rule ] { cpu | interface interface-type
interface-number destination-vlan { l2-vpn | l3-vpn } | next-hop ip-addr1 [
ip-addr2 ] [ invalid { forward | drop } ] | slot slotid designated-vlan vlanid [
join-vlan ] }
undo traffic-redirect inbound ip-group { acl-number | acl-name } { rule rule
link-group { acl-number | acl-name } [ rule rule ] | link-group { acl-number |
acl-name } rule rule [ join-vlan ] }
or undo traffic-redirect inbound link-group { acl-number | acl-name } { rule
rule ip-group { acl-number | acl-name } | ip-group { acl-number | acl-name } rule
rule }
Command Format Which Only Applies Link Group ACL
traffic-redirect inbound link-group { acl-number | acl-name } [ rule rule [
system-index index ] ] { cpu | interface interface-type interface-number
destination-vlan { l2-vpn | l3-vpn } | next-hop ip-addr1 [ ip-addr2 ] [ invalid {
forward | drop } ] | slot slotid designated-vlan vlanid [ join-vlan ] }
undo traffic-redirect inbound link-group { acl-number | acl-name } [ rule rule ]
View
Ethernet port view, port group view
Parameter
ip-group { acl-number | acl-name }: Activates IP ACLs, including basic and
advanced ACLs. acl-number : Sequence number of ACL, ranging from 2000 to
3999. acl-name: Name of the ACL, which must be a character string starting (1 to
32 characters) with an English letter (a-z or A-Z), and without any space in it.
link-group { acl-number | acl-name }: Activates Layer 2 ACLs. acl-number:
Sequence number of ACL, ranging from 4000 to 4999. acl-name: Name of ACL,
which must be a character string (1 to 32 characters) started with an English letter
(a-z or A-Z), and without any space in it.
rule rule: Specifies the rule of an active ACL, ranging from 0 to 127; if not
specified, all rules of ACL will be activated.
system-index index here is the system index for an ACL rule. When delivering a
rule, the system assigns a globally unique index to it, for convenience of later
retrieval. You can also assign a system index for it when delivering an ACL rule
with this command, but this value may change while the system is running.
Generally you are not recommended to manually assign a system index.
cpu: Redirects packets to the CPU.
interface interface-type interface-number destination-vlan { l2-vpn | l3-vpn :
Redirects packets to the specified Ethernet port. interface-number and
interface-type together can define a port. destination-vlan { l2-vpn | l3-vpn } is
used to redirect MPLS packets. l2-vpn means that MPLS l2-vpn packets are
To Next Page
Loading...
