898 CHAPTER 52: UDP HELPER CONFIGURATION COMMANDS
Parameter
ip-address: IP address of the destination server, in dotted decimal notation. This
argument can be the address of a host or the broadcast address of a subnet. Up to
20 destination servers can be configured on a VLAN virtual interface.
Description
Use the udp-helper server command to specify the destination server for the
UDP packets to be forwarded.
No destination server is configured by default.
Related command: display udp-helper server.
Example
# Specify to forward UDP packets to the server whose IP address is 192.1.1.2.
<SW8800>system-view
System View: return to User View with Ctrl+Z.
[SW8800]interface Vlan-interface 1
[3Com-Vlan-interface1] udp-helper server 192.1.1.2
To Next Page
Loading...
