5 Mode Functions
Mode
DVB-T/H with T2
Selects the DVB-T/H mode for measurements of digital video signals using this format. There are several
power and demod measurements available in this mode.
If you are using the Help feature, this mode must be currently active to access its detailed information. If it
is not active, exit the Help feature (Esc key), select the mode, and re-access Help.
Key Path
Mode
Example INST:SEL DVB
INST:NSEL 235
Initial S/W Revision A.02.00
Modified at S/W Revision A.07.00
EMI Receiver
The EMI Receiver Mode makes EMC measurements. Several measurements are provided to aid the user in
characterizing EMC performance of their systems, including looking at signals with CISPR–16 compliant
detectors, performing scans for interfering signals, and determining and charting interfering signals over
time.
If you are using the Help feature, this mode must be currently active to access its detailed information. If it
is not active, exit the Help feature (Esc key), select the mode, and re-access Help.
Key Path
Mode
Example INST:SEL EMI
INST:NSEL 141
Initial S/W Revision A.07.01
GSM/EDGE/EDGE Evo
Selects the GSM with EDGE mode for general purpose measurements of signals following this standard.
There are several measurements available in this mode.
If you are using the Help feature, this mode must be currently active to access its detailed information. If it
is not active, exit the Help feature (Esc key), select the mode, and re-access Help.
Key Path
Mode
Example INST:SEL EDGEGSM
INST:NSEL 13
Initial S/W Revision Prior to A.02.00
Modified at S/W Revision A.02.00
EMI Receiver Mode Reference 237
To Next Page
Loading...
Need help?
General
