11 APD Measurement
Meas Setup
Comment
Sets an ASCII comment field, which will be stored in an exported file. The comment can be displayed in the
active function area by selecting it as the active function, if desired to be in a screen capture. The Limits .csv
file supports this field.
Key Path
Meas Setup, Limits, Properties
Remote Command
:CALCulate:APD:LLINe[1]:COMMent “string”
:CALCulate:APD:LLINe[1]:COMMent ?
Example CALC:APD:LLIN:COMM “European Emissions”
Preset “” (null String), not affected by Mode Preset, preset by Restore Mode Defaults.
State Saved Saved in instrument state.
Initial S/W Revision A.13.00
Edit Limit
Opens the Table Editor for the selected limit line.
Key Path
Meas Setup, Limits
Initial S/W Revision A.13.00
Navigate
Enables you to move through the table to edit the desired point.
Key Path
Meas Setup, Limits, Edit
Notes There is no readback value on the key
Min 1
Max 2000
Initial S/W Revision A.13.00
Frequency
Enables you to edit the frequency of the current row.
Key Path
Meas Setup, Limits, Edit
Notes There is no readback value on the key
Min 0
Max 1 THz
Initial S/W Revision A.13.00
944 EMI Receiver Mode Reference
To Next Page
Loading...
Need help?
General
