10 Monitor Spectrum Measurement
Meas Setup
Key Path
Meas Setup, Signal List, Delete Signals
Remote Command
:CALCulate:SLISt:DELete:SIGNal <integer>
Example CALC:SLIS:DEL:SIGN 4 Delete signal #4.
Notes If the signal list contains no data, an error is generated and this function cannot be performed.
When signals in the signal list were successfully deleted, an advisory is generated.
If the selected signal is not in the list, an error is generated and this function cannot be performed.
Initial S/W Revision A.13.00
Delete All
Marks and deletes all signals in the signal list. If you accessed this function from the front panel, the
following message will prompt you for confirmation to delete the selected signals from the signal list..
This will delete all signals. Are you sure you want to do this?
Please press Enter or OK to proceed. Press ESC or Cancel to close this dialog.
Key Path
Meas Setup, Signal List, Delete Signals
Remote Command
:CALCulate:SLISt:DELete:ALL
Example CALC:SLIS:DEL:ALL
Notes If the signal list contains no data, an error is generated and this function cannot be performed.
When signals in the signal list were successfully deleted, an advisory is generated.
Initial S/W Revision A.13.00
Delete Marked
Deletes all marked signals in the signal list. If you accessed this function from the front panel, the
following message will prompt you for confirmation to delete the selected signals from the signal list.
This will delete the marked signals. Are you sure you want to do this?
Please press Enter or OK to proceed. Press ESC or Cancel to close this dialog.
Key Path
Meas Setup, Signal List, Delete Signals
Remote Command
:CALCulate:SLISt:DELete:MARKed
Example CALC:SLIS:DEL:MARK
Notes If the signal list contains no data, an error is generated and this function cannot be performed.
If no marked signal is found in the signal list, an error is generated and Delete Marked cannot be
performed.
When signals in the signal list were successfully deleted, an advisory is generated.
Initial S/W Revision A.13.00
EMI Receiver Mode Reference 785
To Next Page
Loading...
Need help?
General
