6 System Functions
System
Restore Input/Output Defaults
Causes the group of settings and data associated with Input/Output front-panel key to be a reset to their
default values. This level of Restore System Defaults does not affect any other system settings, mode
settings and does not cause a mode switch. .
Confirmation is required to restore the Input/Output setting. The confirmation dialog is:
Key Path
System, Restore System Defaults
Example :SYST:DEF INP
Initial S/W Revision Prior to A.02.00
Restore Power On Defaults
This selection causes the Power On settings to be a reset to their default value. This level of Restore
System Defaults does not affect any other system settings, mode settings and does not cause a mode
switch. The Power On settings and their default values are Power On Type reset to Mode and Input/Output
Defaults and Power On Application reset to whatever the factory set as its default value.
Confirmation is required to restore the factory default values. The confirmation dialog is:
Key Path
System, Restore System Defaults
Example :SYST:DEF PON
Initial S/W Revision Prior to A.02.00
EMI Receiver Mode Reference 341
To Next Page
Loading...
