Keysight PXA X Series User Manual

3 Programming the Analyzer
STATus Subsystem
The Status Byte Register
The RQS bit is read and reset by a serial poll. The same bit position (MSS) is read, non-destructively by the
*STB? command. If you serial poll bit 6 it is read as RQS, but if you send *STB it reads bit 6 as MSS. For more
information refer to IEEE 488.2 standards, section 11.
106 EMI Receiver Mode Reference

Keysight PXA X Series Specifications

General

Brand	Keysight
Model	PXA X Series
Category	Measuring Instruments
Language	English