6 System Functions
System
Licensing…
Opens the license explorer.
This feature is not available if option SF1 is installed.
For Help on this key, select Help in the menu bar at the top of the license explorer window.
Key Path
System
Notes No equivalent remote command for this key.
Backwards Compatibility
Notes
In ESA the SCPI command for displaying the Show Licenses screen is:
:SYSTem:CONFigure:LKEY:STATe OFF|ON|0|1:SYSTem:CONFigure:LKEY:STATe?
There are no equivalent SCPI commands in the X-Series for displaying the License Explorer.
Initial S/W Revision Prior to A.02.00
Remote
Comman
d
:SYSTem:LKEY <”OptionInfo”>, <”LicenseInfo”>
Example SYST:LKEY “N9073A–1FP”,
”027253AD27F83CDA5673A9BA5F427FDA5E4F25AEB1017638211AC9F60D9C639FE539735909C551DE0
A91”
Notes The <”OptionInfo”> contains the feature and the version. You must specify the feature but can omit the version. If
you omit the version, the system regards it as the latest one, since the system knows which version is supported for
each feature.
The <”LicenseInfo”> contains the signature, the expiration date, and serial number for transport if transportable.
You must specify the signature, but you can omit the other information. If you omit the expiration date, the system
regards it as permanent. If you omit the serial number, the system regards it as non-transportable. As a result, this
supports reverse compatibility.
Initial S/W
Revision
Prior to A.02.00
Remote
Comman
d
:SYSTem:LKEY:DELete <”OptionInfo”>,<”LicenseInfo”>
Example SYST:LKEY:DEL ‘N9073A–1FP”,
”027253AD27F83CDA5673A9BA5F427FDA5E4F25AEB1017638211AC9F60D9C639FE539735909C551DE0
A91”
Notes The <”OptionInfo”> contains the feature and the version. You must specify the feature but can omit the version. If
you omit the version, the system regards it as the latest one, if more than one version is installed.
The <”LicenseInfo”> contains the signature, the expiration date, and whether or not be transportable. You must
specify the signature, but you can omit the other information. If you omit the expiration date, the system regards it
as permanent. If you omit the transportability, the system regards it as non-transportable. As a result, this supports
reverse compatibility.
Initial S/W
Revision
Prior to A.02.00
346 EMI Receiver Mode Reference