Keysight PXA X Series User Manual

3 Programming the Analyzer
STATus Subsystem
Remote Command
:STATus:QUEStionable:FREQuency:NTRansition <integer>
:STATus:QUEStionable:FREQuency:NTRansition?
Example STAT:QUES:FREQ:NTR 2 Frequency Reference ‘regained lock’ will be reported to the Frequency
Summary of the Status Questionable register.
Preset 0
Min 0
Max 32767
Status Bits/OPC
dependencies
Sequential command
Initial S/W Revision Prior to A.02.00
Questionable Frequency Positive Transition
This command determines which bits in the Questionable Frequency Condition register will set the
corresponding bit in the Questionable Frequency Event register when the condition register bit has a
positive transition (0 to 1). The variable <integer> is the sum of the decimal values of the bits that you want
to enable.
Mode All
Remote Command
:STATus:QUEStionable:FREQuency:PTRansition <integer>
:STATus:QUEStionable:FREQuency:PTRansition?
Example STAT:QUES:FREQ:PTR 2 Frequency Reference ‘became unlocked’ will be reported to the Frequency
Summary of the Status Questionable register.
Preset 32767
Min 0
Max 32767
Status Bits/OPC
dependencies
Sequential command
Initial S/W Revision Prior to A.02.00
Questionable Integrity Register
"Questionable Integrity Condition " on page 127
"Questionable Integrity Enable " on page 128
"Questionable Integrity Event Query " on page 128
"Questionable Integrity Negative Transition " on page 129
"Questionable Integrity Positive Transition " on page 129
Questionable Integrity Condition
This query returns the decimal value of the sum of the bits in the Questionable Integrity Condition register.
EMI Receiver Mode Reference 127

Keysight PXA X Series Specifications

General

Brand	Keysight
Model	PXA X Series
Category	Measuring Instruments
Language	English