11 APD Measurement
Meas Setup
Off
Pressing this key, turns the demodulation function off.
Key Path
Meas Setup, Analog Demod Tune&Listen
Example :APD:DEM OFF Turns off demodulation function.
State Saved Saved in instrument state.
Initial S/W Revision A.13.00
Meas Preset
Returns the measurement local variables in the current measurement to their preset values.
Key Path
Meas Setup
Remote Command
:CONFigure:APD
Example CONF:APD
Initial S/W Revision A.13.00
956 EMI Receiver Mode Reference
To Next Page
Loading...
