8 Frequency Scan Measurement
AMPTD Y Scale
dBµA/m
Sets the amplitude unit for the selected amplitude scale (log/lin) to dBµA/m. This is an antenna unit, and
this key is grayed out unless a Correction with this Antenna Unit selected is ON. If this is the case, all of the
other Antenna Units are grayed out.
Key Path
AMPTD Y Scale, Y Axis Unit, Antenna Unit
Example UNIT:POW DBUAM
Dependencies Grayed out if no Amplitude Correction with an Antenna Unit is on.
Readback dBµA/m
Initial S/W Revision A.02.00
dBµA
Sets the amplitude unit for the selected amplitude scale (log/lin) to dBµA. This is an antenna unit, and this
key is grayed out unless a Correction with this Antenna Unit selected is ON. If this is the case, all of the
other Antenna Units are grayed out.
Key Path
AMPTD Y Scale, Y Axis Unit, Antenna Unit
Example UNIT:POW DBUAM
Dependencies Grayed out if no Amplitude Correction with an Antenna Unit is on.
Readback dBµA
Initial S/W Revision A.11.00
dBpΤ
Sets the amplitude unit for the selected amplitude scale (log/lin) to dBpT. This is an antenna unit, and this
key is grayed out unless a Correction with this Antenna Unit selected is ON. If this is the case, all of the
other Antenna Units are grayed out.
Key Path
AMPTD Y Scale, Y Axis Unit, Antenna Unit
Example UNIT:POW DBPT
Dependencies Grayed out if no Amplitude Correction with an Antenna Unit is on.
Readback dBpT
Initial S/W Revision A.02.00
dBG
Sets the amplitude unit for the selected amplitude scale (log/lin) to dBG. This is an antenna unit, and this
key is grayed out unless a Correction with this Antenna Unit selected is ON. If this is the case, all of the
other Antenna Units are grayed out.
390 EMI Receiver Mode Reference
To Next Page
Loading...
