Keysight PXA X Series User Manual

5 Mode Functions
Mode
LTE-Advanced TDD
As LTE-Advanced TDD and LTE TDD modes are converged into one single application, the single softkey
under Mode menu is designed to select the coverged mode. The display mode of the LTE TDD and LTE-
Advanced TDD are distinguished by the licenses.
If you are using the Help feature, this mode must be currently active to access its detailed information. If it
is not active, exit the Help feature (Esc key), select the mode, and re-access Help.
Key Path
Mode
Example INST:SEL LTEATDD
INST:NSEL 108
Notes When the N9082A/82B–1FP exists, the display mode name is LTE TDD.
When the N9082A/82B–1FP and N9082B–2FP all exist, the display mode name is LTE TDD & LTE-A
TDD.
Backwards
Compatibility SCPI
INST:SEL LTETDD
INST:NSEL 105
Initial S/W Revision A.14.00
Modified at S/W Revision A.14.50
MSR
Selects the MSR mode. The MSR mode makes several measurements for Cellular Communication devices
that can be configured with multiple radio formats simultaneously following the 3GPP standard of Multi-
Standard Radio, including GSM/EDGE, WCDMA/HSPA+ and LTE.
If you are using the Help feature, this mode must be currently active to access its detailed information. If it
is not active, exit the Help feature (Esc key), select the mode, and re-access Help.
Key Path
Mode
Example INST:SEL MSR
INST:NSEL 106
Initial S/W Revision A.09.491
Noise Figure
The Noise Figure mode provides pre-configured measurements for making general purpose
measurements of device noise figure.
If you are using the Help feature, this mode must be currently active to access its detailed information. If it
is not active, exit the Help feature (Esc key), select the mode, and re-access Help.
Key Path
Mode
Example INST:SEL NFIGURE
INST:NSEL 219
Initial S/W Revision Prior to A.02.00
240 EMI Receiver Mode Reference

Keysight PXA X Series Specifications

General

Brand	Keysight
Model	PXA X Series
Category	Measuring Instruments
Language	English