9 Strip Chart Measurement
View/Display
Flat Color
Selects a format that is best when the screen is to be printed on an ink printer.
Key Path
Save, Screen Image, Themes
Example MMEM:STOR:SCR:THEM FCOL
Readback Flat Color
Initial S/W Revision Prior to A.02.00
Flat Monochrome
Selects a format that is like Flat Color. But only black is used (no colors, not even gray), and no fill.
Key Path
Save, Screen Image, Themes
Example MMEM:STOR:SCR:THEM FMON
Readback Flat Mono
Initial S/W Revision Prior to A.02.00
Backlight
Accesses the display backlight on/off keys. This setting may interact with settings under the Windows
"Power" menu.
When the backlight is off, pressing ESC, TAB, SPACE, ENTER, UP, DOWN, LEFT, RIGHT, DEL, BKSP, CTRL,
or ALT turns the backlight on without affecting the application. Pressing any other key will turn backlight on
and could potentially perform the action as well.
Key Path
View/Display, Display, System Display Settings
Remote Command
:DISPlay:BACKlight ON|OFF
:DISPlay:BACKlight?
Preset ON (Set by Restore Misc Defaults)
Initial S/W Revision Prior to A.02.00
Backlight Intensity
An active function used to set the backlight intensity. It goes from 0 to 100 where 100 is full on and 0 is off.
This value is independent of the values set under the Backlight on/off key.
Key Path
View/Display, Display, System Display Settings
Remote Command
:DISPlay:BACKlight:INTensity <integer>
:DISPlay:BACKlight:INTensity?
Example DISP:BACK:INT 50
722 EMI Receiver Mode Reference
To Next Page
Loading...
Need help?
General
