Keysight PXA X Series - Dbma

11 APD Measurement
AMPTD Y Scale
dBmA
This sets the amplitude unit for the selected amplitude scale to dBmA.
Key Path
AMPTD Y Scale, Amplitude Unit
Example UNIT:APD:POW DBMA
Dependencies Grayed out if an Amplitude Correction with an Antenna Unit is ON.
Readback dBmA
Initial S/W Revision A.13.00
W
This sets the amplitude unit for the selected amplitude scale to watts.
Key Path
AMPTD Y Scale, Amplitude Unit
Example UNIT:APD:POW W
Dependencies Grayed out if an Amplitude Correction with an Antenna Unit is ON.
Readback W
Initial S/W Revision A.13.00
V
This sets the amplitude unit for the selected amplitude scale to volts.
Key Path
AMPTD Y Scale, Amplitude Unit
Example UNIT:APD:POW V
Dependencies Grayed out if an Amplitude Correction with an Antenna Unit is ON.
Readback V
Initial S/W Revision A.13.00
A
This sets the amplitude unit for the selected amplitude scale to Amperes.
Key Path
AMPTD Y Scale, Amplitude Unit
Example UNIT:APD:POW A
Dependencies Grayed out if an Amplitude Correction with an Antenna Unit is ON.
Readback A
Initial S/W Revision A.13.00
902 EMI Receiver Mode Reference