Keysight PXA X Series User Manual

6 System Functions
System
Configuration list (Remote Command Only)
This remote command is used to set or query the list of applications to be loaded in-memory.
Remote Command
:SYSTem:PON:APPLication:LLISt <string of INSTrument:SELect names>
:SYSTem:PON:APPLication:LLISt?
Example :SYST:PON:APPL:LLIS "SA,BASIC,WCDMA"
Notes <string of INSTrument:SELect names> are from the enums of the :INSTrument:SELect command.
The order of the <INSTrument:SELect names> is the order that the applications are loaded into
memory, and the order that they appear in the Mode Menu.
Error message –225 "Out of Memory" is reported when more applications are listed than can reside
in Virtual Memory. When this occurs, the existing applications load list is unchanged.
Preset Not affected by Preset
State Saved Not saved in instrument state
Initial S/W Revision A.02.00
Configuration Memory Available (Remote Command Only)
This remote command is used to query the amount of Virtual Memory remaining.
Remote Command
:SYSTem:PON:APPLication:VMEMory[:AVAilable]?
Example :SYST:PON:APPL:VMEM?
Preset Not affected by Preset
Initial S/W Revision A.02.00
Configuration Memory Total (Remote Command Only)
This remote command is used to query the limit of Virtual Memory allowed for applications.
Remote Command
:SYSTem:PON:APPLication:VMEMory:TOTal?
Example :SYST:PON:APPL:VMEM:TOT?
Preset Not affected by Preset
Initial S/W Revision A.02.00
Configuration Memory Used (Remote Command Only)
This remote command is a query of the amount of Virtual Memory used by all measurement applications.
Remote Command
:SYSTem:PON:APPLication:VMEMory:USED?
Example :SYST:PON:APPL:VMEM:USED?
Preset Not affected by Preset
Initial S/W Revision A.02.00
EMI Receiver Mode Reference 289

Keysight PXA X Series Specifications

General

Brand	Keysight
Model	PXA X Series
Category	Measuring Instruments
Language	English