Keysight PXA X Series User Manual

3 Programming the Analyzer
STATus Subsystem
bit 6) to your numeric sum when you enable any bits for a service request. The command *SRE? returns the
decimal value of the sum of the bits previously enabled with the *SRE <integer> command.
The service request enable register presets to zeros (0).
Standard Event Status Register
The standard event status register contains the following bits:
108 EMI Receiver Mode Reference

Keysight PXA X Series Specifications

General

Brand	Keysight
Model	PXA X Series
Category	Measuring Instruments
Language	English