11 APD Measurement
Marker
Delta Marker Y Axis Value
Enables you to set the selected marker to Delta mode, and gets the marker Y Axis Values. The output is
always a relative value referred to the reference marker.
Remote Command
:CALCulate[1]|2:DELTamarker[1]|2|...|4:Y?
Example CALC:DELT3:Y? Turn on maker 3 in Normal mode and query the Y axis relative value.
Notes This SCPI is alias to :CALC:APD:MARK[1]|2|3|4:MODE DELT; :CALC:APD:MARK[1]|2|3|4:Y?
Initial S/W Revision A.13.00
EMI Receiver Mode Reference 925
To Next Page
Loading...
