Keysight PXA X Series User Manual

3 Programming the Analyzer
STATus Subsystem
Remote Command
:STATus:QUEStionable:PTRansition <integer>
:STATus:QUEStionable:PTRansition?
Example STAT:QUES:PTR 16
Temperature summary ‘questionable asserted’ will be reported to the Status Byte Register.
Preset 32767
Min 0
Max 32767
Status Bits/OPC
dependencies
Sequential command
Initial S/W Revision Prior to A.02.00
Questionable Calibration Register
"Questionable Calibration Condition " on page 116
"Questionable Calibration Enable " on page 116
"Questionable Calibration Event Query " on page 117
"Questionable Calibration Negative Transition " on page 117
"Questionable Calibration Positive Transition " on page 118
Questionable Calibration Condition
This query returns the decimal value of the sum of the bits in the Questionable Calibration Condition
register.
The data in this register is continuously updated and reflects the current conditions.
Mode All
Remote Command
:STATus:QUEStionable:CALibration:CONDition?
Example STAT:QUES:CAL:COND?
Preset 0
Status Bits/OPC
dependencies
Sequential command
Initial S/W Revision Prior to A.02.00
Questionable Calibration Enable
This command determines which bits in the Questionable Calibration Condition Register will set bits in the
Questionable Calibration Event register, which also sets the Calibration Summary bit (bit 8) in the
Questionable Register. The variable <integer> is the sum of the decimal values of the bits you want to
enable.
116 EMI Receiver Mode Reference

Keysight PXA X Series Specifications

General

Brand	Keysight
Model	PXA X Series
Category	Measuring Instruments
Language	English