MAINTENANCE AND SERVICING
Maintaining Fuel Filters
The windrower fuel system is equipped with primary (A) and secondary (B) screw-on cartridge type filters. The
primary filter (A) is equipped with a separator that separates sediment and water from the fuel.
Refer to the following procedu re s:
• Removing Pri
mary Fuel Filter, page 346
• Installing P
rimary Fuel Filter, page 347
• Removing Sec
ondary Fuel Filter, page 348
• Installing
Secondary Fuel Filter, page 348
Figure 5.7
3: Fuel System Filters
Removing
Primary Fue l Filter
DANGER
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove
the key from the ignition before leaving the operator’s seat for any reason.
1. Stop the engine and remove the key.
2. Open the hood. Refer to 5.2.3 Opening Hood (Highest
Position), page 307.
3. On the bottom of the fuel tank, locate the fuel supply
valve (A) and m ove it to the closed position.
Figure 5.74: Fuel System
147649 346 Revision A
To Next Page
Loading...
