MAINTENANCE AND S ERVICING
4. Locate the primary fuel filter (A) on the righ t
cab-forward side of the windrower.
NOTE:
Bottom part of the image made transparent to show
location of the primary filter.
Figure 5.75: Fuel Filter Locations
5. Clean around the primary filter (A) head.
6. Disconnect the water in fuel (WIF) sensor (B) from
bottom of filter.
7. Turn valve (C) by hand counterclockwise and drain
filter into a con tainer.
8. Remove filter (A) w ith a filter wrench.
9. Clean gasket mating surface.
Figure 5.76: Fuel System
Installing Primary Fuel Filter
IMPORT
ANT:
Do NOT p
refill fi lter with fuel. Prefilling can co ntaminate th e fuel sy ste m.
NOTE:
If replacing filter, ref er to 8.2.4 Filter Part Numbers, page 467.
147649 347 Revision A