MAINTENANCE AND S ERVICING
3. Pinch the wire retainer (A) and lift away from hooks.
4. Remove bulb (B) from body.
IMPORTAN T:
Do NOT touch the glass of the halogen bulb as
the oils or other chemicals from your skin will
cause the bulb to fail prematurely.
Figure 5.137: Headlight Assembly
5. Align lugs (B) on new bulb with slots (C) in body and
push into place.
6. Secu re bulb with wire reta iner (A) .
Figur
e 5.138: Headlight Assembly
147649 379 Revision A
To Next Page
Loading...
