Siemens HiPath 3000 Service Manual

System Programming Codes (Expert Mode Codes)
P31003-H3550-S403-4-7620, 02/05
A-8 HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual
pcodes.fm
16 14 4 on Incomplete, intercept: 0 = no, 1 = yes
16 14 5 on Automatic recall, intercept: 0 = no, 1 = yes
16 15 Hunt/group call
16 15 1 Called station no.; select group and assign destination
16 15 2 Ring type; select group and type:
1 = Circular hunt group
2 = Linear hunt group
3 = Group call
4 = Group call, no answer
5 = Basic MULAP
6 = Executive MULAP
7 = Group call, call waiting
16 15 3 Group name; select group and enter name
(only optiset E memory and optiPoint 600 office)
16 15 4 Select host (master)/executive, group, and station (only stations that are
not the host (master) telephone in another group)
16 16 Call allocation, day; select slot/trunk and assign station no.
16 17 Call allocation, night; select slot/trunk and assign station no.
16 18 Call forwarding—no answer
16 18 1 Select call destination list and destination index (1 – 4).
Call destination lists:
● up to and including V1.2 = 70
● V3.0 or later =
– 500 for HiPath 3750, HiPath 3700
– 376 for HiPath 3550, HiPath 3500
– 70 for all other systems
Select destination (1 – 4), possible entries:
● targeted call number of a station or a group
● * = identical to called station
● #9 = system search of all stations except for the executive exten-
sions
● #201 – #260 = uniform call distribution group 01 to group 60
● #301 – #316 = announcement device 01 to 16
● an external destination, in other words call numbers in satellites and
in the central office
Table A-3 Expert Mode Codes
Code Function

Siemens HiPath 3000 Specifications

General

Brand	Siemens
Model	HiPath 3000
Category	Telephone
Language	English