Reset and clock control (RCC) RM0091
100/742 Doc ID 018940 Rev 1
Bits 22 DBGMCURST: Debug MCU reset
Set and cleared by software.
0: No effect
1: Resets Debug MCU
Bits 21:19 Reserved, must be kept at reset value.
Bit 18 TIM17RST: TIM17 timer reset
Set and cleared by software.
0: No effect
1: Reset TIM17 timer
Bit 17 TIM16RST: TIM16 timer reset
Set and cleared by software.
0: No effect
1: Reset TIM16 timer
Bit 16 TIM15RST: TIM15 timer reset
Set and cleared by software.
0: No effect
1: Reset TIM15 timer
Bit 15 Reserved, must be kept at reset value.
Bit 14 USART1RST: USART1 reset
Set and cleared by software.
0: No effect
1: Reset USART1
Bit 13 Reserved, must be kept at reset value.
Bit 12 SPI1RST: SPI1 reset
Set and cleared by software.
0: No effect
1: Reset SPI1
Bit 11 TIM1RST: TIM1 timer reset
Set and cleared by software.
0: No effect
1: Reset TIM1 timer
Bit 10 Reserved, must be kept at reset value.
Bit 9 ADCRST: ADC interface reset
Set and cleared by software.
0: No effect
1: Reset ADC interface
Bits 8:1 Reserved, must be kept at reset value.
Bit 0 SYSCFGCOMPRST: SYSCFG and COMP reset
Set and cleared by software.
0: No effect
1: Reset SYSCFG and COMP