Trimble TMX-2050 - Page 129

GNSS receiver settings 5 Connectivity
Setting Options
Scintillation Mode Turn mode on or off.
Position Quality Select the appropriate choice:
l Favor Accuracy (Default) : Use for operations needing highest
accuracy (such as row crop planting and strip-till).
l Balanced Quality: Trades potential accuracy for longer
production time.
l Favor Availability: Expands production time further with
potential for reduced accuracy.
Channel/Radio Frequency Tap to show a list of frequencies. If you have already entered
frequencies, choose the appropriate one. Otherwise, tap in the row.
A Modify button displays. Tap Modify. Enter a number from 403.0
MHz to 473.0 MHz for the frequency
Add an optional description. You can enter up to 40 frequencies,
numbers and symbols , using up to 9 characters including the
decimal place (e.g., 450.00000).
Protocol
l PCCEOC 4800
l PCCEOC 9600
l PCCEOT 4800
l PCCEOT 9600
l PCCFST19200
l PCCSATEL 19200
l TRIMMARK2 4800
l TRIMMARK3 19200
l TT450 4800
l TT450 9600
l TT450S 1600
l TT450S 8000
Secure RTKKeys Enter up to 5 security keys , with an optional description for each.
xFill Runtime
(Available only if you
turned on xFill.)
20 minutes. With xFill selected as a backup source, this is how long
the display will use xFill after the correction service becomes
unavailable.
xFill RTK Base Datum
(Available only if you
turned on xFill.)
l WGS84/ ITRF2008 (Default)
l NAD83
l ETRS89
l GDA94
Version 1.075, Revision C TMX-2050 Display User Guide 129