Boom height control 8 Implements
Tap... To...
Sensing Mode Select how the system will detect the boom height:
l Ground: Boom height is based on the surface of the ground.
Use Ground mode to sense the ground surface through low
coverage vegetation, such as stubble or young crops.
l Canopy (default): Boom height is based on the top of the crop
canopy. Select Canopy mode to sense the closest object seen.
This is used to sense bare ground or high-coverage broad leaf
crop canopy.
Note – Ground mode is susceptible to unwanted reflectance on
hard or wet surfaces, such as bare ground. If this is an issue, select
Canopy mode.
Target Height Step The distance the target height will increase.
Version 1.075, Revision C TMX-2050 Display User Guide 213
To Next Page
Loading...
