Xerox Phaser 6500

Phaser 6500/WorkCentre 6505 Service Manual Xerox Internal Use Only 3-19
Error Messages and Codes
033 774 Fax Codec Error
Error 033-774
Press Ok Button
<FAX TX Encode Output Buffer Over>
In FAX send, JBIG encode output buffer
overflow.
page
77
775 Fax Codec Error
Error 033-775
Press Ok Button
<FAX RX Encode Output Buffer Over>
In FAX receive, JBIG encode output
buffer overflow.
page
78
776 Fax Codec Error
Error 033-776
Press Ok Button
<SCAN Encode Output Buffer Over>
In FAX scan and D-FAX scan, JBIG encode
output buffer overflow.
page
77
777 Fax Codec Error
Error 033-777
Press Ok Button
<FAX RX Decode Input Buffer Over>
In FAX receive, when copying from ECM
buffer to JBIG decode input buffer, input
buffer overflow.
page
78
779 Fax Report Error
Error 033-779
Press Ok Button
<Log File Create Fail>
Cannot create log file of communication
result.
page
78
782 Fax Communication Error
Error 033-782
Press Ok Button
<NSS/DCS Function disagreement>
Received NSS/DCS function disagrees
with capability of own terminal.
page
79
784 Fax Codec Error
Error 033-784
Press Ok Button
<Buffer Job Failure>
In FAX receive, JBIG decode output
buffer overflow.
page
78
786 Fax Codec Error
Error 033-786
Press Ok Button
<Codec Error Job Failure>
In JBIG data decode, discrepancy
between the number of decode line and
the number of BIH line.
page
58
787 MFP Memory Full
Error 033-787
Press Ok Button
<Memory Full Job Failure>
Calling table full.
page
58
788 Fax Memory Full
Error 033-788
Press Ok Button
<Memory Full Job Failure>
Flash full. (for DFAX)
page
56
795 Fax Send Error
Last Sheet not Sent
Press Ok Button
<FAX Send Count Limit>
Reach the upper limit of Fax send
accumulation pages.
This error occurs when the sheet count of
a single fax transmission exceeds 75.
To send more than 75 sheets at a time,
divide the documents in blocks.
799 Fax Codec Error
Error 033-799
Press Ok Button
<Communication Job Failure>
In MH,HR,MMR receive, exceed the
maximum number of received lines for 1
page.
page
80
Error Code List & Error Message Summary (continued)
Error Code
Error Message
LCD
Error Description Go To