3-22 Xerox Internal Use Only Phaser 6500/WorkCentre 6505 Service Manual
Error Messages and Codes
042 325 Motor Error
Error 042-325
Restart Printer
<IOT Main Motor Failure>
Main Motor failure is detected.
page
86
326 Motor Error
Error 042-326
Restart Printer
<IOT Sub Motor Failure>
Sub Motor failure is detected.
page
87
372 Solenoid Error
B/W Mode
Error 042-372
Restart Printer
<IOT K Mode Solenoid Error 1>
An error is generated when K Mode
Solenoid (Color Mode Switching
Solenoid) does not operate in specified
time.
page
88
373 Solenoid Error
B/W Mode
Error 042-373
Restart Printer
<IOT K Mode Solenoid Error 2>
An error is generated when the gear
which operates by K Mode Solenoid
(Color Mode Switching Solenoid) rotates
two times.
page
88
700 Printer Overheated
Error 042-700
Wait for printer to
cool down
<IOT Over Heat Stop>
The temp. Sensor sensed high
temperature.
page
90
061 370 Laser Error
Error 061-370
Error Code:xxxxxxxx
Restart Printer
<IOT ROS Failure>
An operation error of ROS (rotational
error etc.) is detected.
page
91
062 311 Scanner Error
Error 062-311
Restart Printer
<IIT Initializing Error>
An IIT initializing error occurred.
page
92
320 Scanner Error
Error 062-320
Restart Printer
<Scanner Error>
An image acquisition error occurred.
page
93
321 Scanner Error
Error 062-321
Restart Printer
<Unexecutable error>
Unexecutable error.(carriage is at the
locked position, etc.)
page
92
322 Scanner Error
Error 062-322
Restart Printer
<Parameter Error>
Abnormality of the parameter.
page
92
360 Scanner Sensor Error
Error 062-360
Restart Printer
<HPSensor Error>
Carriage home position error.
page
92
371 Scanner Lamp Error
Error 062-371
Restart Printer
<IIT Lamp Error>
An IIT Lamp error occurred.
page
92
393 Scanner Error
Error 062-393
Restart Printer
<CCD ASIC Error>
A CCD ASIC communication error
occurred.
page
92
Error Code List & Error Message Summary (continued)
Error Code
Error Message
LCD
Error Description Go To
http://www.manuals4you.com
To Next Page
Loading...
