Xerox VersaLink B7025 Service Manual

April 2017
2-158
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
016-567, 016-568
Launch Issue
Status Indicator RAPs
016-567 Backup Capacity Full RAP
016-567 NVM data to back up is over the capacity of the destination to save it.
Procedure
Perform the steps that follow:
1. Before performing the HDD backup, delete existing backup files through to increase the
capacity.
2. Before performing USB backup, delete the backup files in the USB memory, or use a PC
to delete unnecessary files on the USB memory to increase the capacity.
016-568 Backup Restore Failed RAP
016-568 NVM data could not be backed up or restored.
Procedure
Perform the steps that follow:
1. Format the hard disk. Refer to dC355 Image Disk Diagnostics.
2. Before performing the restore using the HDD backup file, delete backup files.
3. For USB backup, check that the USB memory is correctly installed. If the fault persists,
use a PC to format the USB Memory.
4. When performing restore using USB backup files, check that the USB memory is correctly
installed. If the fault persists, delete the backup files.
5. If the problem still persists, use a PC to format the USB memory.

Xerox VersaLink B7025 Specifications

General

Print Speed	Up to 25 ppm
Print Resolution	Up to 1200 x 1200 dpi
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Control Panel	5-inch color touchscreen
Duplex Printing	Standard
Processor	1.05 GHz
Memory	2 GB
Paper Output	250 sheets
Fax Speed	33.6 kbps
Fax Transmission Speed	3 seconds per page
Display	5-inch color touchscreen
Connectivity	Ethernet 10/100/1000 Base-T, High-speed USB 3.0
Functions	Print, Copy, Scan
Media Sizes Supported	A4, A5, A6, B5
Printer Type	Laser
Copy Speed	Up to 25 ppm
Mobile Printing	Apple AirPrint, Google Cloud Print, Xerox Print Service Plug-in for Android