April 2017
vi
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
Safety Information
Launch Issue
Introduction
Safety Information
The WARNING that follows is for general guidance when live working.
WARNING
Do not work in a confined space. 1m (39 inches) space is needed for safe working.
Safety Icons
The safety icons that follow are displayed on the machine:
ESD Caution Symbol
CAUTION
Certain components in this product are susceptible to damage from electrostatic discharge.
Observe all ESD procedures to avoid component damage.
Location Arrow Symbol
The location arrow symbol points to the location to install, to gain access to, or to release an
object.
Hot Surface Symbol
This symbol indicates hot surfaces. Take care when servicing the machine.
Lethal Voltage Symbol
This symbol indicates potentially lethal voltages. Take care when servicing the machine when
the power cord is connected.
Toner Cartridge
The product contains a toner cartridge that is recyclable. Under various state and local laws, it
may be illegal to dispose of the cartridge into the municipal waste. Check with the local waste
officials for details on recycling options or the proper disposal procedures.
Fuses
WARNING
Do not install a fuse of a different type or rating. Installing the wrong type or rating of
fuse can cause overheating and a risk of fire.
Part Replacement
Only use genuine Xerox approved spare parts or components to maintain compliance with leg-
islation and safety certification. Also refer to GP 21 Restriction of Hazardous Substances
(RoHS).
Disassembly Precautions
Do not leave the machine with any covers removed at a customer location.
Reassembly Precautions
Use extreme care during assembly. Check all harnesses to ensure they do not contact moving
parts and do not get trapped between components.
General Procedures
Observe all warnings displayed on the machine and written in the service procedures. Do not
attempt to perform any task that is not specified in the service procedures.
To Next Page
Loading...
Need help?
General
