Xerox VersaLink B7025 Service Manual

April 2017
2-242
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
018-410, 018-411, 018-414
Launch Issue
Status Indicator RAPs
018-410, 018-411 Dynamic DNS Update Failure RAP
018-410 For Ethernet 2, failed to update the IPv4 address and host name to the DNS server.
018-411 For Ethernet 2, failed to update the IPv6 address and host name to the DNS server.
Procedure
Perform the steps that follow:
1. Advise the customer to:
a. Check if the DNS server address is correctly set to the machine.
b. Check if the DNS server is set so that the dynamic DNS can be operated.
2. If the fault persists, perform the 016A Workflow Scanning Error Entry RAP.
018-414 Duplicate IPv6 Address 2 RAP
018-414 The IPv6 manual setting address that was set in this machine in a network environ-
ment connected to Ether 2 is invalid.
Procedure
Perform the steps that follow:
1. Advise the customer to:
a. Change the IPv6 manual setting address of this machine to the IPv6 address that
can be used in the machine address.
b. Check if the IPv6 address that was automatically set as manual address is a valid
address.
2. If the fault persists, perform the 016A Workflow Scanning Error Entry RAP.

Xerox VersaLink B7025 Specifications

General

Print Speed	Up to 25 ppm
Print Resolution	Up to 1200 x 1200 dpi
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Control Panel	5-inch color touchscreen
Duplex Printing	Standard
Processor	1.05 GHz
Memory	2 GB
Paper Output	250 sheets
Fax Speed	33.6 kbps
Fax Transmission Speed	3 seconds per page
Display	5-inch color touchscreen
Connectivity	Ethernet 10/100/1000 Base-T, High-speed USB 3.0
Functions	Print, Copy, Scan
Media Sizes Supported	A4, A5, A6, B5
Printer Type	Laser
Copy Speed	Up to 25 ppm
Mobile Printing	Apple AirPrint, Google Cloud Print, Xerox Print Service Plug-in for Android